121015

Final review of documents.

Printed out four A3 chessboards and cut out cardboard mounting. These are required for Kinect calibration.

Added lab sheet and preperation paper to all four laptop desktops.

121016

Final check of laptops, all four are working okay.

Finished off slides for presentation.

121017

Final update to slides.

Loaded equipment into UTE, good thing we have one as I have filled it up with all the equipment.

Took one hour to setup for lab.

Loaned a Kinect from Andrew Irlitti a PhD student in the Wearable Computer Lab.

Liem remembered to bring his Kinect.

Daniel's Kinect did not have a power supply so could not use that. This gave us three groups of three as two people did not turn up.

Lab went very well apart from a cut/paste error in the find command to count the total Kinect calibration poses taken. My fault for not testing it. Went over the two hours by about ten minutes.