HOW TO DETERMINE YOUR RING SIZE

There are different ways to get your ring size, you can choose any one of ways below.

1 Go to your local jeweler.

Your ring size can be determined by placing a ring that fits you on a professional ring sizer mandrel on your local jeweler, using a professional ring sizer, or finding an approximate fit with a ring size chart or finger size strip. Remember to measure your finger at room temperature as well as both the heat and cold can cause your fingers to swell or constrict.

2 Use a Ring Size Chart to Determine Your Ring Size

Determine your ring size by using a ring that already fits you. Place this ring over the nearest size circle. The inner edge of the ring should align with the outer edge of the circle. If your ring seems to fit between two sizes, then opt for the larger size.

3 Measure Ring Size With a Finger Size Strip

　

You can create your own ring sizer to determine what size rings you should be buying. Simply print and cut out the strip below. Insert the narrow end of the sizer through the "cut here" slot. Place the loop around your finger, with the numbers facing the outside, then pull until the fit is snug but comfortable.

a. Wrap a piece of string or a strip of paper around your finger.

b. Mark the point where the two ends meet.

c. Measure the string or paper against a ruler to get the circumference "Size (mm)" of your finger.

d. Look up your ring size using the chart below.

RING SIZE CHART