|
POWERSINC TRAP
Synchronizing belts with trapezoidal indentation
POWERSINC TRAP belts provide extreme precision to the transmission system because they are produced under top quality control and use high level raw material that is reliable and generates constant pitch. They can be produced in rubber or PU with tensile cords of kevlar, glass fiber or steel. REXON keeps in inventory a variety of lengths of the following profiles: MXL (40 to 1012 indentations); XL (350 to 650 indentations); L (26 to 530 indentations); H (40 to 472 indentations); XH (53 to 200 indentations); XXH (56 to 144 indentations); T2.5 (48 to 200 indentations); T5 (20 to 444 indentations); T10 (26 to 567 indentations) and T20 (54 to 238 indentations. Lengths or materials that are not in inventory can be made to order.
|
|
POWERSINC TRAP-SPEC
Synchronizing belts with special indentation
POWERSINC TRAP-SPEC belts have a special design that offers high linear speed, high efficiency in transmission and reduced system layout. They can be produced in rubber or PU with tensile cords of kevlar, glass fiber or steel. REXON keeps in inventory a variety of lengths of the following profiles: AT5 (45 to 210 indentations); AT10 (50 to 80 indentations). Lengths or materials that are not in inventory can be made to order.
|
|
POWERSINC SCIR
Synchronizing belts with semi-circular indentation
POWERSINC SCIR belts were developed for high torque systems that, in the past, could only used chains or gears. The greatest advantage of this line is the semi-circular shape that offers greater resistance consequently better distributing the applied force. They can be produced in rubber or PU with tensile cords in kevlar, glass fiber or steel. REXON keeps in inventory a variety of lengths of the following profiles: 3M (37 to 600 indentations); 5M (60 to 1060 indentations); 8M (46 to 700 indentations); 14M (69 to 340 indentations); 20M (100 to 280 indentations); S3M (40 to 600 indentations); S4.5M (36 to 229 indentations); S5M (30 to 400 indentations); S8M (55 to 400 indentations) and S14M (69 to 358 indentations). Lengths or materials that are not in inventory can be made to order.
|
|
POWERSINC W LINE
Synchronizing belts with double indentation
POWERSINC W LINE belts offers synchronism on both of their sides, using a varied pulley system allowing the use of the same belt. The position of superior and inferior indentations can be arranged in symmetric (D) or displaced modes (DZ). They can be produced in rubber or PU with tensile cords in kevlar, glass fiber or steel. REXON keeps in inventory a variety of lengths of the following profiles: D-WL, D-XL, D-L, D-H, DXH, DXXH, D-T2.5 D-T5, D-T10 and D-T20. Lengths or materials that are not in inventory can be made to order.
|
