BARGAINS!

Audio Test Set

AWA 215-2

  $55  SOLD OUT

This instrument has:

1) An RC oscillator with 13 spot frequencies, (excellent for distortion measurements with adjustable distortion meters like the AWA F240) between 200 and 3600Hz (can be easily modified for other freqs., to 100kHz); the output level can be adjusted from 0-3V continuously, in 10dB ranges, (+/-0.2dB); on 10, 600 or 1200 ohms , selectable. Output coupling is by means of a high quality, shielded wide band transformer.

2) A precision wide-band level meter, with a range of 10mV to 30V, 50Hz to 650 kHz (-80 to +33dBm, +/-0.5dB), with input impedances of 1Mohm, 1200, 600, 150 or 75 ohms.

3) Audio monitor with internal amplifier and loudspeaker.

4) Mains operation; internal rechargeable batteries (2 x 12V, not supplied) or external 48VDC.

This instrument model was used by Telecom for many years and proved to be very reliable. It has many other features like voice simulator generator, a weighted response filter to CCITT (psophometer), monitoring outputs, variable gain compensation, etc.

A copy of the circuit and a carrying case is supplied with the instrument.

Oscilloscope

Philips PM3217

$325 SOLD

2 channel; 50MHz; dual time-base; delayed triggering; portable oscilloscope. Mains supply or external 24VDC; a few scratches but working well. Tested.

 

Audio Oscillator

AWA G231

$150 SOLD OUT

Portable; low-distortion; RC oscillator providing calibrated sine signal from 10Hz-30kHz in 4 ranges. Balanced and unbalanced outputs; +/- 0.3dB flatness; 20uV to 10V output, -60dBm to +20dBm/+/-0.25dB in 10dBm steps plus fine level control;40/600 ohms . Hum and noise < -105dBm; dist. < 0.1%; 2-speed dial drive. AC mains or internal batteries (not supplied). Carrying case supplied. Tested.

Oscilloscope

HP 1741A

$450 SOLD

We received more of these! 100MHz; Storage or conventional use; 2 channels; delayed time base. One of the best oscilloscopes at this price, triggers to 150MHz. An industry standard for many years and used by major manufacturers. Adjusted and calibrated. Now only one left! (The other 3 sold already)

Oscilloscope

Leader LBO514A

$300

Dual channel; 15MHz, triggers to 25 Mhz; ext. triggering. We normally do not supply accessories with the equipment, but this one comes with one probe and manual ( please remind us about it !). Good for general service work. Very reliable and simple to operate. Tested and calibrated, in very nice condition.

Oscilloscope

Tek 922

$300 SOLD

15MHz; 2 channels. Tektronix quality. A simple, reliable and lightweight CRO for service work.

 

 

Audio Distortion Meter

Leader LDM170

$300 SOLD

Measures distortion, signal to noise ratio, and signal levels; 20Hz to 20kHz, auto balancing network; measures up to the tenth harmonic of 20kHz (200kHz). S/N to 70 dB below reference; levels from 100uV to 300V/20-200kHz; monitor output; tested.

 

Power Supply

Advance PM5

$25 SOLD

0-15VDC / 5A; adjustable; circuit supplied.

 

 

HP-IB Controller/Computer

HP 85

$250

CRT screen; HP-Basic programming; thermal printer; tape drive; Easy interfacing to peripherals and instruments; no accessories; as is, untested. Can be tested to manufacturer specifications if requested. Please enquire

 

Battery Charger

RC 1-12

$55

Constant current battery charger. 1V to 12V/200mA.

 

 

Chart Recorder

Shinko SR201E

$150

Temperature Chart Recorder, simple and beautifully made, in near new condition. Panel cut-out:138x138mm, depth:approx.260mm with cables. The front door swings open to change the chart roll and the pen, the complete recorder slides out of the cabinet when a lock is released. The expended chart folds neatly at the bottom of the holder in a tray. Temperature range of scale fitted (can be changed) is 0 to 200°C, in 2°C steps; 4 inch chart with pen. Single channel, 3 speeds(100mm/h,50mm/h,25mm/h), 115/240 VAC, supplied with mains cable and plug. The thermocouple (supplied) is 200mm long, 6mm dia., stainless steel, with an end metal junction box and a 2m connecting cable. Tested OK.

Chart Recorder

Chessel 306B/2

$225

High quality, British made, Temperature Chart Recorder. The Chart Holder swings out when unlocked to replace the chart roll, and the scale swings up to replace the ink pen assy. Chart speeds are: off;5;10;20;30;60 and 120mm/h, selectable with a thumbwheel and an LED display accessible when the chart holder is removed. Two alarms can be set a different temps., also the zero and span (full instructions in the operation & service manual supplied with the recorder). For 240 VAC/50Hz. The chassis can be extracted if unlocked.Temperature range of scale fitted: 0 to 100°C, in 2°C steps; 4 inch chart/ 6 Channels; supplied with operation & service manual. Ink-cartridge and chart rolls not supplied but available on request. Panel cut out:138x138mm; depth: 350mm. Good condition. Tested OK.

RMS Voltmeter

HP 3400A

$150

SOLD

True RMS voltmeter, 1mV to 300V in 12 ranges, 10Hz-10MHz +/-1% (50Hz/1MHz). Input impedance 10MHz on all ranges. Rear output for DVM or chart recorder. Sold as is.

AC voltmeter

HP 400E

$150

Input from 1mV to 300V FS in 12 ranges, 10Hz-10MHz, accuracy: +/-1% !!!(40Hz/2MHz). Input impedance 10Mohm on all ranges. Can be used with oscilloscope probe. The scale has deteriorated on these ones ( it was originally a decal, that is now peeling off), but can be repaired by a skilled techo. We supply a stick-on scanned copy of a good scale, and full instructions with the instrument; several units have been repaired and are now in use. An excellent instrument for precision audio work,...and very cheap! The service manual is available. Sold as is.

Multimeter

AVO 8 Mk2

$50   SOLD

Legendary. Sold as is.

Oscilloscope

Aaron BS601

$250 SOLD

General purpose oscilloscope, with component tester. Dual channel, 20 MHz bandwidth, vertical sensitivity: 5mV/div. to 5V/div. Vertical modes: Ch. A, Ch. B, dual, add, channel B invert. The trace is bright and clear. Sold as is.

RF Voltmeter

HP 411A

$120 SOLD

Measures RF voltage from 10mV to 10V fsd; probe input impedance: 100kohms; scale in V and dBm (50ohms); furnished with BNC probe adaptor; type N Tee adaptor, VHF probe tip, capacitive divider (100:1) probe, clamp tip probe and 50ohm precision termination for dBm measurements. Frequency response: +/- 1dB from 100kHz to 1GHz. Tested.

This list is constantly updated. Check for new additions or sold equipment. Prices can change, although we will generally honour the published price.

Back to the Main Page