1. Place the short leg (A) over the rim of the bag engaging partition (E).
2. Place the long leg (B) over the rim of the bag engaging partition (E).
3. Place adjustable centre strut (C) over the rim of the bag above partition (F).
4. Pass the cable ties provided through the holes in the strut and legs (A,B,C,) and around (E,F) as shown in diagram and lightly tension. Push cable tie clip down under the partition until excess "tail" hangs vertically down inside bag or alternatively the excess tail can be cut off.
5. Hook the transit cover web loop (H) under the clip on short leg (A).

NOTE: For best performance the centre divider (F) could be removed.