TRUE BYPASS TO ELIMINATE TONE SUCKING
Tone sucking is the most common complaint about wah pedals. The design of the
most common "Crybaby" wah and of the Vox reissues is a throwback to earlier years
when true bypass was not considered to be an absolute requirement in pedal design.
The input of the wah circuit is connected to the guitar signal all the time, and the
loading of the wah input affects the treble of the guitar signal disproportionately,
giving a deader sound even when the wah is "bypassed".
There are two ways around this. One is to completely disconnect the wah board
from the guitar signal when the wah pedal is bypassed by changing the Single Pole
Double Throw (SPDT) switch that is stock in most wahs for a Double Pole Double
Throw (DPDT) footswitch. This converts the stock wah pedal to true bypass,
and tone sucking is eliminated.
Mods include

• Super bright LED
• True bypass
• Mid range boost
• Volume gain when pedal is engaged
• New pot fitted (ICAR taper 100k)
• Adjustable "Q" to make wah sound more vocal
• Fasel or Whipple inductor fitted
• Replacement PCB
• Input, output jack replacement (Take the jacks off the PCB Crybaby GCB95 only)
• Drop in full wah refit (just drop it in, includes all the inside parts of a wah, pot, PCB, switch, jacks, wiring the lot)

WAH MODS & PRICES  For a list of parts and prices click HERE

The True bypass kit is sent to you and you fit it yourself. (Note add $5.00 for postage.)

• True bypass Kit $30 (DPDT Switch, Resistors, solder, braid, instructions)
  (LED add $5)

The following prices are if you send the pedal to me to be modded.....

Due to Aussie dollar dropping i have to increase
my prices slightly.

• True bypass $40 (DPDT Switch)
• True bypass with mods $55
• True bypass with mods and LED $65 (3PDT switch)
• True bypass Adj mods and LED $75 (Trimpots/3PDT switch)
• Fasel / Whipple inductor fitted $60
• New pot $55 (ICAR Taper 100k)
• Modded crybaby GCB95 $160 (True bypass with Volume, mid and "Q" mods)
  (LED add $10)
• Modded Vox 847 $190 (True bypass with Volume, mid and "Q" mods)
  (LED add $10)
• Drop in kit (The whole guts!!!) $120

I can supply most parts including, pot, Inductors (whipple/Fasel), switch, PCB, resistors, caps, jacks.