DYNAMIC TESTING SYSTEMS
UTM (Universal Testing Machine)
KNR UTM series are used for tensile, compression and bending test for various kinds of rubber textile plastics, metals etc.
Drive Shaft & Joint Simulation Testing System
All components are designed to handle continuously up to 300hp or torque up to 3000Nm or speeds up to equivalent rotation speed to vehicle velocity 300km/h. This system will faithfully reproduce speed, torque, jounce, and steer simultaneously on four specimens. The complete assembly is dynamically balanced to operate smoothly over a whole operating speed range.
Drive Shaft Performance Testing System
Drive Shaft Performance Testing System faithfully reproduces speed, torque, jounce, and steer simultaneously on two specimens. The complete assembly is dynamically balanced to operate smoothly over a whole operating speed range. High Force & Large Scale Testing System
For full scale or near full scale applications in CivilEngineering testing such as long supporting beams or highway bridge components,while the basic mechanics ofthe load frame and dynamic performance are similar to theconventional large scale machine.
The primary difference between these two systems are the extended baseplate
other testing systems include:
-Drive Shaft & Joint Simulation Testing System
-High Angle Torque Testing System
-Drive Shaft Performance Testing System
-Multi-Axes Test Bench for Railway System
-High Speed Wheel & Rail Contact Simulation Testing System
-Bogie Testing Rig System
-Derailment Simulation Testing System
-Suspension Components Testing System
-High Speed Bogie Simulation Testing System
DT &T offer a Series of Electra mechanical testing systems provide the simplicity, performance, and affordability needed for quality
control and product testing. From routine, standardized QC tests to general purpose mechanical testing,this a affordable solution for todays modern laboratory.
The DT&T 900 Series of Dual Column Testing Systems are ideal for tension and/or compression applications where tests are less than 50 kN (11,250 lbf). The
Series Dual Column testing systems provide simplicity, performance, and affordability for quality control and product testing. Models are available in load force capacities of 10, 30,
and 50 kN and greater.
Features
-100:1 force range (i.e. use the load cell to 1.0% of capacity with no loss of accuracy)
- Load accuracy of 0.5% of indicated load
- 100 Hz data acquisition rate
- Full software control (cyclic capability optional)
- Optional TouchPanel control
- Automatic transducer recognition
- Thousands of optional grips and fixtures
- Optional temperature chambers
- Choice of three colors (Red, Blue, or Grey)
Electromechanical universal testing machine (UTM) max. 2980
kN | 900Series
Electromechanical or universal testing machines are most commonly used for static testing in a tensile or compression mode within a
single frame. They are also referred to as pull testers. Additional test types include tensile, compression, shear, flexure, peel, tear, cyclic, and bend tests. Capacities for these systems
range from low-load forces of 0.5 kN (112 lbf) up to high-capacity 2980kN (300 Ton) test frames. These systems are frequently configured for automated testing.
0.1 kN to 2980 kN Testing Systems
The Series offers exceptional performance packaged in innovative frames, designed with enhancements that deliver superior accuracy and reliability, improved ergonomics, and an
enhanced overall experience for the operator.
- Engineered for Precision
- Built for Durability
- Flexibility to Change
- Designed for Usability
Electromechanical or universal testing machines are most commonly used for static testing in a tensile or compression mode within a single frame. They are also
referred to as pull testers. Additional test types include tensile, compression, shear, flexure, peel, tear, cyclic, and bend tests. Capacities for these systems range from low-load forces
of 0.5 kN (112 lbf) up to high-capacity 2980 kN (300 Ton) test frames. These systems are frequently configured for automated testing.
900 Testing Systems
The 900 Series offers exceptional performance packaged in innovative frames, designed with enhancements that deliver superior accuracy and reliability, improved ergonomics, and an
enhanced overall experience for the operator.
- Engineered for Precision
- Built for Durability
- Flexibility to Change
- Designed for Usability
