Previous PageNext Page

AKSA 55

Description

"The Aksa 55 is a solid state, push-pull power amplifier module delivering 55 watts RMS into an 8ohm load"

This was my very first DIY amp that I actually completed. I had done a few PCBs to get in practice before starting this project. The wiring is a little untidy and the earthing scheme is questionable.

After 5 years, this is still the best sounding amp I have built.

Links
Picture

(This amp has been rebuilt and looks a little different now. I will endeavour to update the picture)

Schematic

This is the "conceptual" schematic of the AKSA, affectionately known as the Baby AKSA.


Previous PageTop Of PageNext Page