Talkback Systems Australia
|
Talkback Systems Australia |
 
|
Two Way Radio Programming Cables These interfaces and cables WILL NOT WORK without the appropriate Radio Programming Software. We Do Not Supply Radio Programming Software. Some of these units are designed as Stand Alone interfaces where you only need the software and your computer. Others are cables that are designed to work in conjunction with Motorola or Clone RIB boxes. Read the product description carefully before making your purchase decision. Radio Programming Cable For Tait 2000 Series Of Two Way Radios This cable together with the correct Tait Programming Software (NOT SUPPLIED BY US) will allow you to program your Tait 2000 Series Two Way Radio. The interface cable plugs into the Microphone Socket of the Radio and the DB9 socket into a serial port on your computer *note* Special proprietary software is required to work in conjunction with this cable. SOFTWARE IS NOT SUPPLIED BY US - CONTACT YOUR LOCAL TAIT DISTRIBUTOR Tait T700 Mobile Programming Interface Programming Interface For The Tait T700 Mobile Radios. Units are powered via the radio you are programming. Has a DB9 for connection to the serial port of your PC and the DB15 for connection to the T700 radio. This interface IS NOT a straight forward cable, there is an RS232 <-> TTL converter circuit board in the box. NO SOFTWARE is supplied, you need to purchase that from your Tait Dealer. Radio Programming Cable For Phillips/Simoco PRM80X Series Of Two Way Radios Programming cable for the Phillips/Simoco PRM80X Series of Two Way Radios. *note* Special software is required to work in conjunction with this cable interface. WE DO NOT SUPPLY SOFTWARE - CONTACT YOUR LOCAL PHILLIPS/SIMOCO DEALER Ribless Programming Cable For Motorola GM300/M120 Mobiles Ribless Programming Interface For Motorola GM300/M120, GM338 Series Mobile Radios This cable with the appropriate software (software IS NOT SUPPLIED by us) will program the Motorola Gm300 & M120, GM338 Series Mobile Radios. The unit requires 12 volts dc from a plug pack (not supplied). The interface has a DB9 Serial connector for connection to your P.C. and a RJ45 for connection into the front microphone socket of the Radio. A Motorola RIB Box IS NOT required for this interface to work Clone Motorola RIB Programming Interface Clone RIB Box For Motorola Two Way Radios This is a clone RIB Box designed to program Motorola Two Way Radios. The unit is powered by 9 volts DC via either an external power supply (Power Supply NOT Supplied) and can take an internal 9 volt battery (battery supplied). The unit connects to the Serial Port of your PC, and then the appropriate RIB programming cable goes between the box and your two way radio. *note* The appropriate Motorola RSS or CPS software is still required to work in conjunction with the box. WE DO NOT SUPPLY SOFTWARE - YOU NEED TO BUY THAT FROM MOTOROLA RIB To Radio Cable Suit Motorola Gm300 Series Rib To Radio Cable Suit Motorola Gm300 Series This is a programming cable to connect between a Motorola or Clone RIB Box and your Motorola Radio. The cable will work with the following Motorola radios: Gm300, M120, Maratrac, Maxtrac, M10, M100, M1225, M130, M200, M400, SM 120, SM 50 and Sportbase radios. Cable has a DB25 female connector and RJ45 connector RIB To Radio Cable Suit Motorola MCS2000 Rib To Radio Cable Suit Motorola MCS2000 Mobile Radios This is a programming cable to connect between a Motorola or Clone RIB Box and your Motorola Radio. The cable will work with the following Motorola radios: MCS2000, MCM2100 & MC900 Cable has a DB25 female connector and RJ45 connector RIB TO Radio Cable Suit Motorola GM950 Rib To Radio Cable Suit Motorola GM950 Mobile Radios This is a programming cable to connect between a Motorola or Clone RIB Box and your Motorola Radio. The cable will work with the following Motorola radios: GM950, GM 350, MCX 600, MCX 1200, MCX 2000 Cable has a DB25 female connector and RJ45 connector RIB To Radio Cable Suit Motorola MCX1000 Rib To Radio Cable Suit Motorola MCX1000 Mobile Radios This is a programming cable to connect between a Motorola or Clone RIB Box and your Motorola Radio. The cable will work with the Motorola MCX 1000 radio Cable has a DB25 female connector and RJ45 connector Programming Cable For Icom IC400PRO Programming Cable To Suit Icom IC400PRO UHF Mobile Radios This cable when used with the appropriate Icom Software (NOT SUPPLIED) can be used to program the Icom IC400PRO UHF Mobile Radios. We do not supply the software, you will need to purchase that from an Icom Dealer.
|
 |
