Current Category
Network Cable Testers

	Multi Network Cable Tester Multi-Network Cable Tester with Pin out Indicator This multi network cable tester is designed to quickly test UTP/STP/Coaxial/Modular network cables by manually or automatically scanning the wires for continuity, incorrect wiring and polarisation. It will sequence each connection and indicate the connections via two 9-way LED bar graphs. Cables can be checked before or after installation by using the Remote Terminator (included). This ingenious cable tester also allows ground- testing of shielded twisted/pair cables. Suitable for testing thin Ethernet (BNC), 10 Base-T (UTP/STP), 356A, TIA- 568A, TIA- 568B and Token Ring network cables. Main unit supplied with: - Active RJ-45 terminator - 2 x RJ-45 to BNC adaptors - Instruction manual Specifications: Dimensions - Main Unit: 104 x 62 x 26mm (LxWxD) - Active Terminator: 100 x 30 x 25mm (LxWxD) - Power Supply: 1 x 9V battery not supplied order * Note: Not suitable for Live circuits		Price:	QTY:

	Smart Multimedia Cable Tester VDV Multimedia Cable tester VDV Multi Media Cable Tester is designed to test all common low voltage cabling systems found in today's automated homes; such as Voice, Data, and Video Networks. Integrated into the base of the unit is remote unit. This allows for termination of cables that are to be tested. * Voice Cable Test Mode, allows the unit to display "Pass" when all pins in an RJ11 are correctly wired in a one to one order, or "Pass Rev" when wired in the reverse order (standard telephone cables used between a phone hand set and the wall are usually reversed-pinned). * Data Cable Test Mode, allows the unit to display "Pass" or if there is a wiring error it will display "Fail", "Short", "Open" or "Split". By electrical testing A and B standards are indistinguishable. If 1-2 and 3-6 are crossed this will result in a pass along with an flashing Uplink icon (denoting a crossover cable). * Video Coax Cable Test Mode, can test a cable for "Open", "Short", and "ID" * Tone Generator Test Mode, Generates audio tones for the use with tone tracers on all pairs, a selected pair or a selected pin. The signal generates a signal on one pin, and the complement of the signal on the other pin (a balanced pair) generating a nominal 10 volts peak to peak across the pair. This allows you to know the pairs have not been swapped. Accessories: * RJ11 Cord * RJ45 Cord * Integrated Removable Remote unit Specifications: * Power by a 9V battery * Tests Cable Types: CAT6, CAT5e, CAT5, CAT4, CAT3 and Coax * Minimum Cable Length: 3 Meters * Size: 13.2 x 7.3 x 4.1cm * Weight: 242 grams with battery remote * Warranty: 1 Year Operating Range: 0- 50 Degrees C Storage Temperature: -10-60 Degrees C Humidity: 10- 90%, non-condensing		Price:	QTY:

 

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant