LOCK

To set or change a telephone handset security pin number

Lift the handset (or press ON-OFF button). Dial tone heard.

Press the STORE button.

Press the LOCK button.

The LCD display will clear, ready to display keypad digits.

Enter the existing 4 digit pin number. (If a pin has not been set, the default pin number will be 0000).

The entered numbers are displayed on the bottom right handside of the LCD, as each number is pressed.

If an incorrect existing pin number has been entered, the LCD display will show SECU r I t y immediately

after entering the 4th number. The SECURITY display will remain, and cannot be removed until

a correct pin number has been entered.

Now enter the new 4 digit pin number. The entered numbers will also be displayed on the LCD display.

A successful pin change is indicated by both the existing and new pin numbers displayed on the LCD display.

Restore the handset (or press ON-OFF button).

Make note of the pin number when set, there is no means to recover a forgotten pin number.

If the telephone handset is placed in LOCK, which disables outgoing calls, outgoing calling

functionality will not be restored until the correct pin number is entered.

To LOCK the telephone handset (set security to ON)

Lift the handset (or press ON-OFFbutton). Dial tone heard.

Press the LOCK button.

Press the TONE button.

The LCD screen displays  on  in the bottom right handside of the display.

Restore the handset (or press ON-OFF button).

Once the handset is LOCKED as above, further attempts to use the handset

to make outgoing calls will fail, as the keypad has been disabled.

In case of emergencies, the numeric keypad 0 is still operational, so that

an emergency call (000) can still be made, even if the handset is locked.

Stored numbers in memory are also inoperable, when the handset is locked.

The speed dial buttons are also inoperable, apart from the top left handside

speed dial button. This allows a single, programmable speed dial button

to be made available when the telephone handset security is set to ON.

To UNLOCK the telephone handset (set security to OFF)

Lift the handset (or press ON-OFF button). Dial tone heard.

Press the LOCK button.

The LCD display will clear, ready to display keypad digits.

Enter the 4 digit pin number. The entered numbers are displayed on the bottom right handside of the LCD.

Restore the handset (or press ON-OFF button).

If the correct pin number has been entered, the LCD display will return to the Day/Date/Time.

The telephone keypad functionality is now returned, and all outgoing calls can be made normally.

If an incorrect pin number has been entered, the LCD display will show SECU r I t y on the right handside

of the display, and the telephone handset will remain unable to make outgoing calls.

The SECURITY display cannot be removed until a correct pin is entered, thus offering an indication

of an unauthorised attempt at removing the LOCK facility.

HELP! I have locked my telephone, and forgotten my pin

The only way to recover from a lost pin number is to force the telephone to return to it's default pin number (0000)

This can be done by removing the batteries from the telephone handset, and leaving them out for a period of time.

(30 minutes should be sufficient). While this will restore the pin number to the default 0000,

it will also erase any stored numbers in memory, pre programmed speed dial numbers, last number dialled,

redial numbers, as well as the day date time and alarm settings.